High Hardness Boron Carbide Nozzle / High Pressure Water Jet Nozzles

High Hardness Boron Carbide Nozzle / High Pressure Water Jet Nozzles

Boron Carbide Nozzle Feature

the interior is designed for a large flow channel to minimize liquid blocking screw nozzle to produce solid (hollow) conical spray, and the droplets are relatively rough.

Boron Carbide Nozzle spcifications:

Use superfine nanometer tungsten carbide particles, the wear-resisting performance to the next level, superior
wear resistance makes it far beyond the ordinary tungsten carbide,The service life of the nozzle.Cobalt
content of less than 0.6%, density of 15.45 g/cm3 ~ 15.6 g/cm3, bending 2000 mpa to 2400MPa.Super oxygen resistance, small thermal expansion coefficient, unique high hardness and density, far beyond the other similar products, the use of hard Alloy tube abrasion resistance stronger.
Sand tube due to high-speed abrasive particle erosion, its selection is very important.Sand tube material, in general, must have high hardness, high resistance Grinding, both be short of one cannot.Generally for tungsten carbide composite materials processing.Usually, cemented carbide, WC as the main
resistance,Grinding phase exists in the form of particles, CO, just as the binder.
Use: widely used in various types machine, WHP type, FLOW type, type JET, KMT, OMAX type, type WS.

Boron Carbide Nozzle application:

• Abrasive Waterjet

• Dry Blasting

• Wet Blasting

• Suction Blast

• Mirco Abrasive

• Scrubber

• Descaling

• Slurry Jet

• Spray Drying
•Centrifuge